Home > News > Industry News

How to install hose clamps


Pipe clamp is generally made of standard carbon steel, pipe clamp structure is simple, beautiful, durable, convenient disassembly and assembly, plastic pipe clamp pipe clamp has unique vibration reduction, sound attenuation, sound absorption, abrasion resistance and other advantages, the upper and lower clamp can be exchanged for the hydraulic system design laying pipe selection. Pipe clamp general scope of application: mainly used in hydraulic, pneumatic system and other aspects of all kinds of pipe fixation, oil, water, gas as the medium of various pipe steel pipe clamp circuit ideal fastener.

Since we all take into account the installation of pneumatic clamp valve, but before installation, it is actually more important to choose the right clamp valve, because in the installation of plastic pipe clamp, installation size and size requirements: nominal diameter, and pipe connection and connection size, size or weight restrictions.

1. Assemble on the welding plate

Before assembly, to better determine the direction of the pipe clamp, mark the fixing point, weld the welding plate, insert the lower part of the pipe clamp, and place the pipe to be fixed. Then put the other half of the tube clamp and cover plate, with screws to tighten.

Nylon clamp
It must be noted that: directly weld the bottom plate with the pipe clamp installed.

2. Mount it on the guide rail

The guide rail can be welded on the foundation, or fixed with screws, then push the guide rail nut into the rail, and turn 90 degrees, insert the lower half of the pipe clamp into the nut, into the pipe to be fixed, and then put the upper half of the pipe clamp and cover plate, fixed with screws.

Stainless steel pipe clamp
3. Stack and assemble

The guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp, put the pipe to be fixed, and then put the upper half of the pipe clamp, fixed with screws, through the anti-loose cover plate to prevent its rotation. Then install the second pipe clamp as above.

Technically speaking, the liner sleeve of the clamp valve is considered to be leak-proof, but the leakage of volatile gas cannot be excluded. The elastomer of the leakage test is FPM (fluorine rubber plastic pipe clamp). The working pressure of the liner liner of the clamp valve depends on the type and specification of the clamp valve.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept